Coating Components

• Electrophoretic Paint Primer: Used as the base layer to provide excellent adhesion and corrosion resistance. This primer is ideal for metal substrates, creating a uniform surface for the application of the topcoat.
• Powder or Spray Finish: The finishing layer, applied either as powder coating or spray paint, enhances the aesthetic appearance of the fan while providing additional durability. This finish offers a smooth, high-gloss, and long-lasting surface that resists scratches, fading, and damage from environmental elements.

Key Features and Benefits
1. Corrosion Resistance:
The electrophoretic paint primer offers exceptional corrosion protection, ensuring that the metal components of the electric fan are shielded from rust and degradation. This is crucial for fans exposed to humidity, heat, and other environmental stressors.

2. Enhanced Durability:
The coating system delivers a durable surface that is resistant to wear, scratches, and stains, ensuring that the fan maintains its appearance over time, even with frequent handling and use.

3. Aesthetic Flexibility:
Available in a variety of colors such as white, gray, black, and others, the system allows for customization to match the design of the fan or the preferences of the consumer. The powder or spray finish provides a high-gloss, smooth surface that enhances the fan's visual appeal.

4. Environmentally Friendly:
The coating system is designed with eco-friendly materials, including low-VOC and water-based primers. The process reduces the environmental impact compared to traditional solvent-based coatings, making it an ideal solution for sustainable manufacturing.

5. Easy Maintenance:
The smooth finish not only improves the appearance but also makes the fan easier to clean and maintain. The coating resists dirt buildup and stains, ensuring the fan stays looking new longer.

6. Versatility:
The coating system is compatible with a variety of metal substrates, including steel, aluminum, and galvanized metals, making it a versatile choice for manufacturers of electric fans. It is also suitable for different fan types, including oscillating fans, box fans, and tower fans.

Application Process
1. Preparation:
The metal surfaces of the electric fan parts are cleaned to remove dust, oils, or contaminants that could affect the adhesion of the primer. The surfaces are pre-treated if necessary, ensuring optimal bonding.

2. Electrophoretic Primer Application:
The electrophoretic primer is applied through an immersion process, where the metal parts are submerged in the primer solution. This method ensures a consistent and uniform layer of primer on all surfaces, including hard-to-reach areas.

3. Drying and Curing:
After the primer is applied, the fan components are dried and cured to ensure the primer adheres properly and forms a durable base.

4. Powder or Spray Finish Application:
Once the primer is fully cured, the final finish is applied. This can be done using either powder coating or spray painting, depending on the desired effect and manufacturing requirements. The finish is then cured to ensure it forms a tough, glossy surface.

5. Quality Control:
After the coating is applied and cured, the fan parts undergo rigorous quality control checks to ensure the coating meets all performance and aesthetic standards. This includes checking for consistency, color matching, and the durability of the finish.

Use Points and Precautions

• Ensure Proper Surface Preparation: For optimal adhesion and performance, it is important that the metal surfaces are thoroughly cleaned and pre-treated before applying the coating.
• Curing Times: Adequate curing times must be observed for both the primer and the finish to ensure the coating achieves its full strength and durability.
• Ventilation: When applying the paint, ensure the area is well-ventilated, especially if using spray paint, to minimize exposure to fumes.
• Environmental Conditions: It is important to apply the coating in controlled environmental conditions (temperature and humidity) to ensure the finish cures properly and achieves the desired results.
• Safety Protocols: Operators should follow safety guidelines and wear appropriate protective equipment, such as gloves, masks, and goggles, to avoid inhalation of fumes or contact with chemicals during the coating process.

The Electric Fan Coating Solution offers manufacturers an efficient, eco-friendly, and high-performance system for producing aesthetically appealing and durable electric fans. With its superior corrosion resistance, enhanced durability, and customizable finish options, this coating solution is ideal for ensuring long-lasting, visually attractive products that meet consumer needs and industry standards.

Support and Services

We will provide the following technical support and services for all products under the Jingtu Paint brand.

• Assistance with product installation and setup
• Troubleshooting and problem solving
• Guidance on proper use and maintenance
• Training and education on product features and functionality
• Regular software updates and patches
• Integration support with other systems or software

QA

1. What is the main function of electrophoretic paint as a primer in the Electric Fan Coating Solution?
Electrophoretic paint serves as a highly effective primer for electric fan components, offering excellent corrosion resistance and ensuring strong adhesion to metal surfaces. It creates a uniform base that enhances the durability and longevity of the finish coat, protecting the fan from environmental factors like moisture and oxidation.

2. Can the coating system withstand high temperatures typically encountered by electric fans?
Yes, the coating system is designed to withstand high operational temperatures. The electrophoretic paint provides excellent thermal stability, while the powder or spray finish offers additional heat resistance, ensuring the fan remains aesthetically appealing and functional even under prolonged exposure to heat.

3. How does the coating contribute to the overall aesthetic appearance of the electric fan?
The coating system provides a smooth, glossy, and uniform finish that enhances the visual appeal of the fan. Available in a variety of colors, including white, gray, black, and custom shades, it helps create a sleek, modern appearance while also protecting the surface from scratches and wear.

4. What are the advantages of using powder or spray paint as the finish for electric fans?
Powder or spray paint provides a durable, smooth, and visually appealing finish with excellent color retention. These finishes are highly resistant to chipping, fading, and scratching, ensuring that the fan maintains its attractive look even after extended use. Additionally, they are environmentally friendly due to lower VOC emissions compared to traditional liquid paints.

5. Can the coating be customized for different electric fan designs and materials?
Yes, the coating solution is highly versatile and can be customized to suit various fan designs and materials. It is compatible with different metal substrates, including steel and aluminum, and can be applied to both the internal and external components of the fan, providing robust protection and aesthetic enhancement.